To make your travel more enjoyable tires are categorised by vehicle type, structure, season, pattern and various other special uses.
Bias Tire
Bias tires are used primarily for off-the-road, agricultural, and industrial vehicles.
Structure of a bias tire
The carcass of a bias tire has cords that alternate with one ply each in a crisscross angle formation. Thus, the angle of the alternating cords against the road surface is approximately 40 degrees on the circumference. Both carcass and belts are made out of nylon.
Change in tire tread while driving
Tread movement is sensitive to shifting weight and number of revolutions as treads wear down more quickly at high levels of heat. However, because the tread is fully capable of supporting weight, bias tires are appropriate for driving on unpaved roads and large vehicles. Their biggest advantage is flexibility and good drivability.
Radial Tire
Radial tires are produced for passenger cars, light trucks, trucks, and buses.
Structure of a radial tire
The radial tire refers to a tire in which the cords are arranged perpendicular to its circumference. Due to this cord arrangement, the radial tire has a lower flatness ratio than the bias tire. Also due to its high horizontal resistance, the radial tire has superior starting, acceleration, controllability, rotationality and safety characteristics and is best suited for high-speed travel. Both carcass and belts are made out of steel.
Change in tire tread while driving
Despite changes in radial tire tread while driving, you will notice no change in the contact area between tread and road surface. The radial tire is often used for passenger cars. Its advantages are high tread resistance and resistance to slipping while cornering due to low rolling resistance while driving.